Set options
35
Adjust performance tab
Search method on
startup
Select from the following projector search
methods executed when EasyMP Network
Projection is started.
Automatic search on startup
Specify search method after startup
Search with the last network configuration
Edit profile
The Edit profile dialog box is displayed.
s "Managing a Profile" p.20
Switch LAN
Windows only
This is used when it is necessary to switch the
network adapter to be used for a search when a
computer has multiple adapters.
By default, all of the network adapters are used to
perform a search.
Restore Defaults
You can reset all adjustment values for Set options
to their default settings. However, you can retain
settings for Edit profile and Switch LAN in
General settings.
Performance
adjustment slider
The performance can be set to Fast, Normal, and
Fine.
Set to Fast when movie projections are
interrupted.
Transfer layered
window
Windows only (excluding Windows Vista and
Windows 7)
The layered window is in use when contents such
as messages displayed on the computer are not
projected by the projector. Select this checkbox to
project contents such as messages that use the
layered window.
Clear this check box if you do not want the mouse
pointer to flicker on the screen.
Restore Defaults
You can reset all adjustment values for Set options
to their default settings. However, you can retain
settings for Edit profile and Switch LAN in
General settings.
To Next Page
Loading...
Need help?
General