Epson PowerLite 1835 User Manual

• Make sure you are operating the remote control within the reception angle and range of the projector.
• Check to see if a button on the remote control is stuck down, causing it to enter sleep mode. Release
the button to wake the remote control up.
• Strong fluorescent lighting, direct sunlight, or infrared device signals may be interfering with the
projector's remote receivers. Dim the lights or move the projector away from the sun or interfering
equipment.
• If available, turn off one of the remote receivers in the projector's menu system, or check if all the
remote receivers were turned off.
• If you assigned an ID number to the remote control to operate multiple projectors, you may need to
check or change the ID setting (feature not available with all projectors).
• If you lose the remote control, you can order another one from Epson.
Parent topic: Solving Projector or Remote Control Operation Problems
Related references
Projector Feature Settings - Settings Menu
Optional Equipment and Replacement Parts
Remote Control Operation
Solutions to Password Problems
If you cannot enter or remember a password, try the following solutions:
• You may have turned on password protection without first setting a password. Try entering 0000 using
the remote control.
• If you have entered an incorrect password too many times and see a message displaying a request
code, write down the code and contact Epson.
• If you lose the remote control you cannot enter a password. Order a new one from Epson.
Parent topic: Solving Projector or Remote Control Operation Problems
Solutions When Network Alert E-Mails are Not Received
If you do not receive an e-mail alerting you to problems with a projector over the network (PowerLite
93/95/96W/905/915W/1835), try the following solutions:
• Make sure the projector is turned on and connected to the network correctly. (If an error shut down the
projector, it cannot send an e-mail.)
• Make sure you set up the projector e-mail alert settings correctly on the projector's network Mail menu
or in the network software.
154

Epson PowerLite 1835 Specifications

Operating Environment

operating temperature range	41 ˚ to 95 ˚F (5 ˚ to 35 ˚C)
fan noise (normal mode)	37 dB
fan noise (eco mode)	29 dB

Power

power supply voltage	100 – 240 V ± 10%, 50/60 Hz AC
power consumption (normal mode)	355 W
power consumption (eco mode)	263 W

Display

projection method	front/rear/ceiling mount
native resolution	1024 x 768 (XGA)
aspect ratio	4:3

Lamp

lamp type	E-TORL 230 W UHE
lamp life (normal mode)	4000 hours
lamp life (eco mode)	6000 hours

Weight and Dimensions

dimensions including feet	13.58" x 10.35" x 5.17"
dimensions excluding feet	13.58" x 10.35" x 3.66"
weight	7.4 lb