Epson PowerLite 1835 User Manual

Using the Remote Control as a Wireless Mouse
You can use the projector's remote control as a wireless mouse so you can control your computer
presentation from a distance.
Note: You cannot use the remote control's wireless mouse function when you use your projector's USB
Type B port to project video. However, you can use the Up and Down Page buttons to move through a
presentation.
1. Connect the projector to a computer using the projector's Computer or HDMI port.
2. Using a USB cable, connect the projector's USB TypeB port to a USB port on your computer (for
wireless mouse support).
3. Press the Menu button, select the Extended menu, and select Wireless Mouse as the USB Type B
setting.
4. Start your presentation.
5. Use the following buttons on the remote control to control your presentation:
• To move through PowerPoint slides, press the Up and Down Page buttons.
• To move the cursor on the screen, use the arrow buttons.
• To left-click, press the Enter button once (press it twice to double-click).
• To right-click, press the Esc button.
• To drag-and-drop, hold the Enter button as you move the cursor with the arrow buttons, then
release Enter at the destination.
Parent topic: Remote Control Operation
77

Epson PowerLite 1835 Specifications

Operating Environment

operating temperature range	41 ˚ to 95 ˚F (5 ˚ to 35 ˚C)
fan noise (normal mode)	37 dB
fan noise (eco mode)	29 dB

Power

power supply voltage	100 – 240 V ± 10%, 50/60 Hz AC
power consumption (normal mode)	355 W
power consumption (eco mode)	263 W

Display

projection method	front/rear/ceiling mount
native resolution	1024 x 768 (XGA)
aspect ratio	4:3

Lamp

lamp type	E-TORL 230 W UHE
lamp life (normal mode)	4000 hours
lamp life (eco mode)	6000 hours

Weight and Dimensions

dimensions including feet	13.58" x 10.35" x 5.17"
dimensions excluding feet	13.58" x 10.35" x 3.66"
weight	7.4 lb