Epson PowerLite 1835 User Manual

Adjusting the Image Height
If you are projecting from a table or other flat surface, and the image is too high or low, you can adjust
the image height using the projector's adjustable feet.
1. Turn on the projector and display an image.
2. To adjust the front foot, pull up on the foot release lever and lift the front of the projector.
The foot extends from the projector.
3. Release the lever to lock the foot.
4. If the image is tilted, rotate the rear feet to adjust their height.
If the projected image is unevenly rectangular, you need to adjust the image shape.
Parent topic: Using Basic Projector Features
Related concepts
Image Shape
71

Epson PowerLite 1835 Specifications

Operating Environment

operating temperature range	41 ˚ to 95 ˚F (5 ˚ to 35 ˚C)
fan noise (normal mode)	37 dB
fan noise (eco mode)	29 dB

Power

power supply voltage	100 – 240 V ± 10%, 50/60 Hz AC
power consumption (normal mode)	355 W
power consumption (eco mode)	263 W

Display

projection method	front/rear/ceiling mount
native resolution	1024 x 768 (XGA)
aspect ratio	4:3

Lamp

lamp type	E-TORL 230 W UHE
lamp life (normal mode)	4000 hours
lamp life (eco mode)	6000 hours

Weight and Dimensions

dimensions including feet	13.58" x 10.35" x 5.17"
dimensions excluding feet	13.58" x 10.35" x 3.66"
weight	7.4 lb