Connecting to a Projector on a Network and Projecting
21
D When Projector keyword is set to "On" from the projector,
the Keyword entry screen is displayed. Enter the keyword
displayed on the LAN standby screen, and then click "OK".
When the connection is complete, the computer screen is project-
ed. The following EasyMP Network Projection toolbar is displayed
on the computer screen. You can use this toolbar to operate the
projector and make settings, and to disconnect the network con-
nection. For details on using the toolbar, see "Using the
Toolbar".s p.24
q
When connecting from another computer, such as when changing
presenters, start EasyMP Network Projection from the computer you want
to connect. The computer that is currently connected is disconnected, and
the projector is then connected with the computer that is trying to connect
now.
To Next Page
Loading...
