PowerLite
®
4100/4200W/4300
Quick Reference
Epson, Instant Off, and Quick Corner are registered trademarks and Epson Exceed Your Vision is a registered logomark of Seiko Epson
Corporation. PowerLite and PrivateLine are registered trademarks of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners.
Epson disclaims any and all rights in those marks.
This information is subject to change without notice.
© 2010 Epson America, Inc. 8/10
CPD-28113
Printed in XXXXXX
This Quick Reference card gives brief instructions on connecting your
PowerLite projector and using common features. For details, install and
view the User’s Guide from the projector’s CD.
Remote Control Map
Turn the projector
on and off
Select a source
Open projector menus
Navigate through menu
settings; move pointer
Select menu settings
Change slides or pages
in a presentation
(optional wireless mouse
receiver required)
Temporarily turn off
display
Automatically adjust
computer image
Change the
aspect ratio
Display on-screen help
Switch image sources
Remote control ID
switch
Open menus assigned
by user
Cancel current
operation or return to
previous menu
Activate screen pointer
Zoom in and out
Freeze the image
Select from 8 color
modes
Use numeric keys to
enter passwords, IP
settings, etc.
Enter passwords
Replacement Parts
Product Product Number
Replacement lamp
PowerLite 4100 V13H010L62
PowerLite 4200W/4300 V13H010L63
Air filter V13H134A17
You can purchase replacement parts from an
Epson authorized reseller. See “Where To Get
Help” inside this card for more information.
VGA cable
Component-to-VGA cable
(optional)
Composite video cable (BNC) (optional)
Component-to-VGA cable
(optional)
To Next Page
Need help?
General