INSTALLATION
HANDBOOK
Lamp and Status Information
Epson PowerLite 450W / 460
1
Checking Projector Status
If your projector isn’t working correctly, rst turn it o and unplug it.
Then plug the power cord back in and turn on the projector. If this
doesn’t solve the problem, check the lights on top of the projector.
What To Do When the Lights Flash
The lights on top of the projector indicate the projector’s status.
Refer to the following tables for a complete description of the
projector’s status lights:
Temperature
light
Lamp light
Power light
Power light status
P
Power light status Description
Flashing green The projector is warming up. Wait for the image to appear.
Green The projector is operating normally.
Orange The projector is in sleep or standby mode. You can unplug it or press the
P power button to turn it on.
Flashing orange Preparing for network monitoring or cooling down.
Red or flashing red There is a problem with the projector. Check the next table to diagnose the
problem.
To Next Page
Need help?
General