Epson POWERLITE 450W Maintenance Guide

INSTALLATION
HANDBOOK
Maintenance
Epson PowerLite 450W / 460
1
Cleaning the Air Filter
Your projector includes an air lter to ensure the best performance
and help protect your equipment investment. If dust collects on the
air lter, clean it as described here. Dust clogs prevent proper
ventilation and can cause overheating, which can damage the
projector.
1. Turn o the projector.
2. Remove dust from the air lter using a small vacuum cleaner
designed for computer or oce equipment, or gently clean the
vent with a soft brush (such as an artist’s paintbrush).
You can remove the air lter to clean both sides.
If the lter is too dirty or broken, replace the lter as described below.
Replacing the Air Filter
You need to replace the air lter if:
You cannot remove the dust from it
The air lter is damaged or torn
You repeatedly see a projected message telling you to clean or
replace it
note
To order replacement air
lters, request part number
V13H134A27.

Epson POWERLITE 450W Specifications

General

Resolution	WXGA (1280 x 800)
Aspect Ratio	16:10
Display Type	3LCD
Projection Size	60 - 100 inches
Lamp Life	5000 hours (Eco Mode)
Weight	6.6 kg
Connectivity	HDMI, VGA, USB, Composite Video
Input Ports	HDMI, VGA, USB, Composite Video
Output Ports	VGA
Noise Level	28 dB (Eco mode)