Projector Network Settings - Network Menu
Installing the Wireless LAN Module
To use the projector over a wireless network, install the EPSON 802.11b/g/n wireless module in the
projector. Do not install any other type of wireless module.
Caution: Never remove the module while its indicator light is green or flashing, or while you are
projecting wirelessly. You may damage the module or lose data.
1. Turn off the projector and unplug the power cord.
2. Unscrew and remove the cable cover if it is attached (screwdriver not included).
51
To Next Page
Loading...
Need help?
General