Epson PowerLite 61p Product Information

Epson PowerLite 61p/81p Projector
10 - Epson PowerLite 61p/81p Projector 6/04
Starting the Projector with a Password
Caution:
If you lose the remote control, you will not be able to enter the
password; so keep the remote control in a safe place at all times.
When the password function is enabled, you see this screen
when you turn on the projector:
Hold down the
Num button on the remote control as you use
the numeric keypad buttons to enter the password. Once you
have entered the password correctly, the password screen closes,
and projection begins.
If the password is not correct, you see the message
Wrong
password. Please try again
. If you enter an incorrect
password three times in succession, you see the message
The
projector’s operation will be locked. Request code xxxxx
and the projector switches to standby mode for approximately 5
minutes. Write down the request code. Then disconnect the
projector’s power cord from the electrical outlet, reconnect it,
and turn the projector back on. When you see the Password
Protect Release screen, enter the correct password.
If you have forgotten the password, contact Epson for assistance
and give them the request code number that appears in the
Password Protect Release screen.
If you enter an incorrect password 30 times in a row, the
projector remains locked and you must contact an authorized
Epson servicer to unlock it.
Disabling the Projector’s Buttons
When you enable the Operation Lock function, all the
projector’s buttons are disabled except for the P
Power button.
This is useful, for example, if you want to prevent students in a
classroom from playing with the projector.
1. Press the
Menu button.
2. Select the
Setting menu and press Enter.
3. Use the pointer button on the remote control (or up and
down arrow buttons on the projector) to select
Operation
Lock
and press the Enter button.
4. Select
ON and press Enter. Then select Yes and press Enter
to confirm the setting.
5. Press the
Menu button to exit the menu system.
Note:
You can cancel Operation Lock by pressing the projector’s
Enter
button for 9 seconds.
Projector Status Lights
The lights on top of the projector indicate the projector’s status
and let you know when a problem occurs.
Power
light
Lamp
light
Temperature
light Description
Flashing
green
Off Off The projector is warming up.
Wait for the image to appear.
Green Off Off The projector is operating
normally.
Flashing
orange
Off Off The projector is cooling
down. Wait for the light to
stop flashing and remain
orange before unplugging it.
Red Flashing
red
Flashing red There is an internal error in
the projector. Turn off the
projector and unplug it.
Contact Epson for help.
Power light
Lamp light
Temperature
light

Epson PowerLite 61p Specifications

General

Brand	Epson
Model	PowerLite 61p
Category	Projector
Language	English