46 Using the Remote Control
4. While the image is enlarged, you can:
■ Use the pointer button to pan about.
■ Press the E-Zoom button to zoom out.
5. When you’re done, press the
ESC button to return to the original
size.
Changing the Image’s Aspect Ratio
If you’re projecting a widescreen format image, you can use the
Resize button on the remote control to change the aspect ratio.
Follow these steps:
1. Press the
Resize button once to change the aspect ratio to 16:9
for widescreen format.
2. Press it again to return to 4:3 aspect ratio.
note
You must be projecting
component, composite, or
S-video images to change the
aspect ratio.
You can also change the
aspect ratio using the
projector’s Signal menu. See
page 55 for details.
To Next Page
Loading...
Need help?
General