22 Setting Up the Projector
Playing Sound Through the Projector
You can connect a commercially available 3.5 mm stereo mini-jack
audio cable to take advantage of the projector’s built-in speaker. You
can obtain the audio cable from a computer or electronics dealer.
1. Connect one end of the 3.5 mm stereo mini-jack audio cable to
the corresponding
Audio1 or Audio2 jack on the projector.
2. Connect the other end of the audio cable to your laptop’s
headphone jack or audio-out jack, or your desktop’s
speaker or audio-out port.
If you don’t need to make any other connections, you can plug in
your projector and turn it on. See page 34 for instructions.
Audio1
and
Audio2
jacks
To Next Page
Loading...
Need help?
General