50 Fine-tuning the Projector
Using the Projector’s Menu System
The projector menus let you adjust and customize the projector
features:
■ The Image menu lets you modify the colors of the projected
image and fine-tune brightness, contrast, and sharpness. See
page 52.
■ The Signal menu lets you make adjustments to the input signal.
You can select your input source, change the image position and
aspect ratio, and adjust tracking and sync for computer images.
See page 54.
■ The Settings menu lets you customize the way you use the
projector. It allows you to adjust the volume and keystone
correction, set lamp brightness to high or low, control use of the
remote control receivers, project a test pattern for adjustments,
and disable buttons on the projector while you are projecting. See
page 56.
■ The Extended menu lets you customize the way you set up the
projector. Among the options, you can select the menu language,
set rear or ceiling projection, turn closed captions on or off, and
record a custom image or logo to be displayed as the startup
screen or whenever you press the
A/V Mute button on the remote
control. See page 58 and page 62.
■ The Network menu lets you select your network settings and
optional passwords for monitoring the projector over a network
or over the web. See page 60.
■ The Info menu provides information about lamp status and
computer or video settings. See page 61.
■ The Reset menu lets you restore the projector’s factory default
settings. See page 69.
To Next Page
Loading...
Need help?
General