52 Fine-tuning the Projector
Press the left or right arrow buttons on the projector or the
remote control to adjust a slider bar.
To select from two or more settings, use the up or down arrow
buttons on the projector or the remote control to highlight the
desired setting, then press
Enter.
5. Press the
Esc button to return to the previous menu or to close
the menu system if you are at the main menu. Your changes are
saved automatically.
6. Press the
Menu button to exit the menu system.
Adjusting Colors and Clarity
The Image menu lets you make adjustments to the colors of the
projected image and fine-tune brightness, contrast, and sharpness.
The options available depend on which image source is selected:
Computer (analog-RGB)
and RGB video
Component,
composite, and S-Video
To Next Page
Loading...
Need help?
General