Solving Problems 89
Solving Network Problems
You don’t see your projector in the EMP Monitor window.
■ Make sure that you’ve connected the projector to the network and
configured it correctly; see page 93. Also, make sure you’ve
registered the projector with EMP Monitor; see page 97.
■ Make sure that Standby Mode in the projector’s Extended menu
is set to
Network On; see page 58.
■ If the computer you are using is running Windows XP or 2000,
you must be logged in as the Administrator.
■ Try restarting your computer.
You don’t receive an e-mail over the network when a
projector problem occurs.
■ Make sure that Standby Mode in the projector’s Extended menu
is set to
Network On; see page 58.
■ Make sure that you’ve connected the projector to the network and
configured it correctly; see page 93.
■ Make sure you set up projector e-mail alerts correctly in the
Network menu (see page 95) or in EMP Monitor (see page 100).
Where To Get Help
Epson provides these technical support services:
Internet Support
Visit Epson’s support website for solutions to common problems with
the PowerLite 822+ or PowerLite 83+. You can download utilities
and documentation, get FAQs and troubleshooting advice, or e-mail
Epson with your questions.
Visit Presenters Online to access tips, templates, and training for
developing successful presentations.
To Next Page
Loading...
Need help?
General