236
Setting Options Description
HDBaseT Control Communications
Extron XTP
Selects the communication settings for
connections to an HDBaseT transmitter or
switcher
Control Communications: enables or
disables communication from the Ethernet
and serial ports on the transmitter; turning
on this setting disables the projector's LAN
and RS-232C ports (Extron XTP must be
turned off to use this setting)
Extron XTP: set to On when you connect
an Extron XTP transmitter or switcher to the
HDBaseT ports
Reset Signal I/O Settings Resets all settings on the Signal I/O menu
to their default values
Parent topic: Adjusting the Menu Settings
Related tasks
Setting Up Monitoring Using SNMP
To Next Page
Loading...
