57
Connecting Multiple Projectors of the Same Model
You can connect up to four projectors of the same model in the same room to project a single unified
image (not available on the PowerLite EB-L520U). If you are creating one large image vertically or
connecting five or more projectors, use the Tiling setting in the projector's Multi-Projection menu.
1. Connect the computer and the projectors using HDMI cables as shown. If you are connecting the
HDBaseT transmitter instead of a computer, use a network cable to connect it to the HDBaseT port.
Note: If you are connecting three or more projectors, connect the projectors in a chain as shown.
2. After making the appropriate connections, you need to adjust the necessary projector menu settings
accordingly. Click the link below.
Multiple Projector Connection Menu Settings
Parent topic: Projector Connections
Related references
Multiple Projector Operation Settings - Multi-Projection Menu
Related tasks
Configuring Tiling Manually
Multiple Projector Connection Menu Settings
After connecting multiple projectors to project a unified image, see the tables below to select the correct
projector menu settings. Make sure your computer is connected to Projector 1 (the left-most projector in
your setup).
To Next Page
Loading...
