119
1 Lamp light
2 Temp light
3 Status light
4 Power light
Status light Power light Lamp light Temp light Status and solution
Blue Blue Off Off Normal operation
Blue Flashing blue Off Off Warming up; wait for an image to appear
Shutting down; when the status light
stops flashing, you can unplug the
projector
Off Off Off Off Standby or sleep mode
Blue Blue Off Flashing
orange
Projector is too hot
• Make sure that the vents and air filter
are not clogged with dust or
obstructed by nearby objects
• Clean or replace the air filter
• Make sure the environmental
temperature is not too hot
Flashing blue Off Off Orange Projector has overheated and turned off;
leave it turned off to cool down for about
five minutes, then do the following:
• Make sure that the vents and air filter
are not clogged with dust or
obstructed by nearby objects
• Clean or replace the air filter
• If operating the projector at high
altitude, turn on High Altitude Mode
• If the problem persists, unplug the
projector and contact Epson for help
To Next Page
Loading...
