74
Solutions When the Screen is Not Projected Properly
If the screen is not projected or there are problems with the project images try the following solutions.
• If you are using a Microsoft Office application, stop moving the mouse pointer. If you move the mouse
pointer continuously, the screen may not be refreshed quickly.
• If the mouse pointer flickers, try the following solutions.
• Select Make the movement of the mouse pointer smooth on the General settings tab on the
Set options screen.
• Clear Transfer layered window on the Adjust performance tab on the Set options screen.
• The Media Player movie playback screen may not be projected depending on the computer.
• The screen saver preview may not be projected properly depending on the computer.
• Reduce the number of connected devices if the connection speed declines.
• For OS X, when playing back movies, start EasyMP Multi PC Projection first before starting playback.
If EasyMP Multi PC Projection is started during movie playback and the display screen resolution and
color numbers are changed, try moving the movie playback window, minimizing it, or resizing it and so
on.
• When using a computer that does not meet the software requirements, images and audio for movies
may stop.
• When another user is the moderator, you cannot control your projected display. Change the
moderator or project the screen without a moderator.
Parent topic: Solving Problems During Projection
Related references
Set options - General settings
Set options - Adjust performance
Related tasks
Changing the Moderator
Solutions When Audio is Not Played Properly
If there is no audio coming from the projector, try the following solutions.
• Audio can only be transferred to one projector. When multiple projectors are connected to one
computer, disconnect other projectors and try again.
• Select Output audio from the projector on the Audio Output tab on the Set options screen.
To Next Page
Loading...
