Epson PowerLite Home Cinema 3100 - Setting up a Projector to Connect in Advanced Connection Mode (Wireless)

20
A screen like one of the following is displayed.
6. Turn on wireless LAN support.
Note: The necessary settings vary depending on your projector. See your projector User's Guide for
instructions.
7. Select Quick for Connection Mode.
8. Select other options as necessary for your network. See your projector User's Guide for instructions.
9. Select security settings on the Security menu as necessary for your network. Check with your
network administrator for more information on making the correct settings.
10. When you have finished making settings, select Setup Complete or Complete and follow the on-
screen instructions to save your settings and exit the menus.
Parent topic: Selecting Projector Network Settings
Related tasks
Connecting the Projector and a Computer Directly Using Wireless Communication
Setting Up a Projector to Connect in Advanced Connection Mode (Wireless)
To connect a computer to the projector over a wireless LAN, you need to select network settings on the
computer and the projector.
1. Contact your network administrator and write down the settings for the access point, such as the
SSID and security settings.