60
The toolbar is displayed.
2. Click the button.
Note:
• You can also use the button on the projection control screen.
• This button is not available for participants when using the moderator function.
Your computer screen is projected in full screen mode.
Parent topic: Using Additional Functions
Changing the Moderator
While using the moderator function, you can change the moderator when another user needs to control
the projected display.
Note: The moderator function is available only on the Standard Edition of the software.
1. On the search screen, select the projector you want to connect to, select Connect as a Moderator,
or disable interrupt connections, and then click Join.
The moderator function turns on and the toolbar is displayed.
2. Click the button on the toolbar.
The projection control screen is displayed.
To Next Page
Loading...
