26
• Only one user is the moderator and has full control over the meeting using the moderator function.
(Holding a class or lesson using the participants' computer screens in an educational environment.)
Note: To start a meeting using the moderator function, one user must connect to the projector as the
moderator and the other users must connect to the projector as participants.
Parent topic: Connection Methods
Related tasks
Changing the Moderator
Connecting to the Projector from the Software over a Network System
Connecting the Projector and a Computer Directly Using Wireless Communication
When your projector is set up as indicated below, you can connect the projector and a computer directly
using wireless communication to project the computer's screen.
• The wireless LAN unit is installed in the projector or the projector has built-in wireless LAN modules.
• The projector's connection method is set to Quick.
To Next Page
Loading...
