81
Error Messages Remedy
The moderator function is not available. You have
been connected as a participant.
The projector you are connecting to does not
support the moderator function. To become the
moderator, change to a projector that supports the
moderator function.
Parent topic: Error Messages List
Related tasks
Changing the Moderator
Event ID List
When a connection error occurs, a number indicating the type of error is displayed as follows.
Event ID: 04xx
Check the numbers and then apply the following countermeasures. If you cannot resolve the problem,
contact your network administrator, or contact Epson as described in your projector User's Guide.
Event ID Cause Remedy
0432 Failed to startup the network software. Restart the projector.
0435
0434 Network communication is unstable. Check the network communication status,
and reconnect after waiting for a while.
0481
0482
0433 Cannot play transferred images. Restart the network software.
0484 Communication was disconnected from the
computer.
04FE The network software ended unexpectedly. Check the status of network
communications. Restart the projector.
04FF A system error occurred in the projector. Restart the projector.
0891 Cannot find an access point with the same
SSID.
Set the computer, the access point, and the
projector to the same SSID.
To Next Page
Loading...
