77
Error Messages Remedy
Cannot find the projector linked to the shortcut file.
Search again.
Check the following items.
• Open a shortcut file in the connection mode for
which you created the shortcut file.
• Open a shortcut file in Advanced Connection
Mode if you use the Participant Edition of the
software.
Files are missing or invalid. Failed to start the
application. Reinstall/remove the application.
Uninstall and then reinstall EasyMP Multi PC
Projection.
Network adapter information could not be
obtained.
Check the following items.
• A network adapter is installed on the computer.
• The driver for the network adapter being used is
installed on the computer.
• The network adapter is enabled.
After checking, restart the computer and then
restart EasyMP Multi PC Projection.
If you still cannot connect, check the network
settings on the computer and the network settings
on the projector.
Cannot start from the shortcut while projecting. Stop projecting and then start projection from the
shortcut. You cannot start projection from the
shortcut when you are already projecting using
EasyMP Multi PC Projection.
Cannot start from the shortcut while the Option
screen is displayed. Close the Option screen, and
then try opening the shortcut again.
The Set options screen is displayed. Close the
Set options screen.
The slide show will not begin until PowerPoint is
restarted.
Close PowerPoint, and then start the slide show
again.
Cannot be used with the current OS version.
Reinstall EasyMP Multi PC Projection.
Reinstall EasyMP Multi PC Projection.
Parent topic: Error Messages List
To Next Page
Loading...
