173
7. Select Location Setup and press Enter.
8. Select the position of each projected image as follows:
• Row Order to layout the screens from top to bottom in sequential order, starting with 1 at the top
• Column Order to layout the screens from left to right, starting with A on the left
9. Repeat the previous step with each projector you are setting up before continuing with the next step.
10. Select the input signal to display an image.
After performing the steps here, adjust the images for any gaps and differences in color.
Parent topic: Tiling Images into One Image
Related tasks
Configuring Tiling Automatically
To Next Page
Loading...
