Epson Pro L12000QNL - List of Safety Symbols (Corresponding to IEC60950-1 A2)

290
1 Hazard distance
2 Throw ratio
Warning: When using projectors and interchangeable lenses that change to Risk Group 3, no direct
exposure to the beam is permitted. Operators must control access to the beam within the hazard
distance or install the product at a height that will prevent eye exposure within the hazard distance.
Parent topic: Important Safety Instructions
List of Safety Symbols (corresponding to IEC60950-1 A2)
The following table lists the meaning of the safety symbols labeled on the equipment.
No. Symbol Approved Standards Description
1 IEC60417
No.5007
"ON" (power)
To indicate connection to the mains.
2 IEC60417
No.5008
"OFF" (power)
To indicate disconnection from the
mains.