209
Setting Options Description
Advanced Video Range Sets the video range to match
the setting of the device
connected to the HDMI, DVI-D,
HDBaseT, or SDI or DisplayPort
input ports; if the brightness
range is 16 to 235 or 0 to 255,
select the Limited option for that
range
Input Signal Specifies the signal type from
input sources connected to
computer ports
Auto: detects signals
automatically
RGB: corrects color for
computer/RGB video inputs
Component: corrects color for
component video inputs
EDID Describes the projector's display
capabilities to devices connected
to the HDMI, HDBaseT, DVI-D,
or DisplayPort input ports so you
can unify multiple displays
DDC Buffer If you are projecting using an
HDMI or DVI extension cable and
the image is not displayed
correctly, enabling this setting
may improve image quality
Scale Various scale options When using multiple projectors to
project one image, adjusts the
scale of the image displayed by
each projector
Note: You cannot set these settings on the Signal menu with the Link Type setting in the Extended
menu's DisplayPort Settings is set to one of the Dual options: Aspect, Overscan, Blanking, Color
Space, Dynamic Range, or Scale.
To Next Page
Loading...
