21
7 Cable clip slot (for commercially available cable tie)
8 RS-232C port
9 Remote port
10 Service port
11 USB-A port
HDMI/DVI-D Interface Board
1 DVI-D In port
2 HDMI In port
3 DC Out port
SDI Interface Board
Note: The SDI1 In and SDI1 Out ports support single-link 12G-SDI signals. The projector supports
quad-link signals. When inputting a quad-link 3G-SDI signal, set the SDI Settings > Link Type setting in
the Extended menu to the correct setting for your SDI signals.
1 SDI1 In port
2 SDI2 In port
To Next Page
Loading...
