243
4. Attach straps or chains to the screws and make sure the angle of the strap is 60 degrees or more
when lifting or lowering the projector.
Caution: Do not lift the projector with the front, back, or side of the projector facing up.
Caution: Do not use the eye bolt screws for permanent installation as this can cause damage.
5. Do one of the following:
• When transporting the projector a long distance or as checked luggage, pack it in a firm box with
cushioning around it and mark the box "Fragile."
• When shipping the projector for repairs, place it in its original packing materials, if possible, or use
equivalent materials with cushioning around the projector. Mark the box "Fragile."
Note: Epson shall not be liable for any damages incurred during transportation.
To Next Page
Loading...
