249
On/Standby
(power) light
Status
light
Laser
light
Temp light Filter
light
Status and solution
Off Flashing
blue
Flashing
orange
Flashing
orange
Off Shutter error. Turn off the projector,
unplug the power cord, and contact
Epson for help.
Flashing blue Varies Varies Flashing
orange
Varies High temperature warning. If the
temperature gets too high, projection
will automatically stop.
• Make sure that the vents and air
filter are not clogged with dust or
obstructed by nearby objects.
• Make sure the environmental
temperature is not too hot.
• Clean or replace the air filter.
Varies Varies Varies Varies Flashing
orange
Air filter notice. Clean the air filter.
Flashing blue Varies Flashing
orange
Varies Varies Laser warning. Turn off the projector,
unplug the power cord, and contact
Epson for help.
Flashing blue Varies Flashing
orange
Varies Varies Lens warning. An unsupported lens
is attached. Attach only a supported
lens.
Flashing blue Varies Flashing
orange
Flashing
orange
Varies Shutter warning. Turn off the
projector, unplug the power cord, and
contact Epson for help.
Flashing blue Varies Varies Varies Orange Low air flow through the air filter.
• Make sure that the vents and air
filter are not clogged with dust or
obstructed by nearby objects.
• Clean or replace the air filter.
• If the problem persists, unplug the
projector and contact Epson for
help.
To Next Page
Loading...
