Epson SC-P9500 Series User Manual

Settings item Setting/Additional Explanation
PS3 Menu (This item is only displayed when the PS option is connected.)
Version Displays the PostScript/PDF version.
Output Size Auto, A Series, US-ANSI, US-ARCH, B Series (ISO), B Series (JIS), Photo Series,
Others, User-Defined
Margin Options Standard, Add Margins, Clip By Margins
Select the difference between the size of the print data and the size of the
output paper.
Quality Draft, Standard, Fine
Color Mode Color, B&W
Only displayed when a paper type that supports color printing and
monochrome printing is selected.
CMYK Simulation You can select the CMYK ink color you want to simulate when reproducing
CMYK ink colors for an offset printer.
RGB Source When printing RGB data, you can select the RGB color definition you want
to simulate.
Rendering Intent You can select how to convert color spaces during Absolute Colorimetric,
Relative Colorimetric, Perceptual, Saturation CMYK simulations and RGM
simulations.
Black Point Compensation On, Off
Normally, select On. Select "Off" if you notice that shadows are too bright
when converting from a wide color space to a narrow color space.
Auto Rotate On, Off
When this is set to "On", the print data is automatically rotated 90 degrees
to the right depending on conditions such as the paper width and data
size.
Caching To HDD On, Off
Normally, select Off. Set this to On if the print head stops frequently while
printing. This may solve the problem.
Save To HDD Print And Save, Print Only, Save Only
PS Error Sheet On, Off
When this is set to On, the contents of the error are printed when a
PostScript error occurs.
Optimize Edge Quality On, Off
When this is set to On, everything is printed in single head mode. The print
quality at the edges is improved, but the print speed is reduced and the
margin at the leading edge is increased by about 35 mm compared to
when this is set to Off.
When this is set to Off, everything is printed in dual head mode. Select On if
you are worried about the print quality at the leading edge of the paper.
PDF Rendering Level Level 1 - 5
Normally, this is set to 5. Although this may create a PS that reproduces the
PDF as faithfully as possible, you may not be able to print. If this occurs, try
lowering the rendering level.
Clear All Settings Restores the PS settings to their default settings.
SC-P9500 Series/SC-P7500 Series User's Guide
Menu List
110

Epson SC-P9500 Series Specifications

General

Brand	Epson
Model	SC-P9500 Series
Category	Printer
Language	English