Epson SC-R5000 Series - Control panel

SureColor R5000/R5000L Service & Support Plan L Rev. B ETS-TP-TG-20-038 Rev. B
European Technical Support Page 16/19
3.7 Required Tools & Application
In order to perform adjustments and maintenance operations, it’s important to have the required
tools as detailed in the Maintenance Procedures. All the required tools information can be found
on Spare Part Information Epson Web Site. You may order these tools with the Epson Spare
Part Service Department.
3.7.1 Hardware
Name :
Sonic Tension Meter U-507
Spare Part Réf :
1294120
Related Adjustments:
CR and PF Belt tension Adjustments
Remarks:
Same tool as SPx700 / x900 / WT7900
Name :
Standard Sheet (Jetras JP-D300S)
Spare Part Réf :
1476228
Related Adjustments:
Operation check for the Paper Edge sensor
Remarks:
Use a carton folder to prevent from damage
Name :
Thickness Gauge
Spare Part Réf :
N/A
Related Adjustments:
PG adjustment
Remarks:
Commercially Available
Name :
Calibrated Loupe
Spare Part Réf :
N/A
Related Adjustments:
CR and PF direction Head Sland adjustment
Remarks:
Commercially Available
3.7.2 Softwares
Before performing any adjustments, it’s necessary to download the following softwares. Service
Program can be downloaded from Epson TechExchange Support Web Site. Printer Firmware
and Drivers can be downloaded from Epson Public Web Site, at the Support Tab.
- Service Program for SC-R5000/R5000L → version to perform and control overall
adjustments
- Communication Driver for SC-R5000/R5000L → available at Epson EMEAR Support
Web Site
- Latest Printer Firmware for SC-R5000/R5000L → available at Epson EMEAR Support
Web Site