*1: For the SC-S80600L Series/SC-S60600L Series only
Item Parameter Explanation
Setting Name Assign the media setting bank a name up to 22 half-size characters long.
Using distinctive names makes it easier to select banks for use.
Media Type Adhesive Vinyl Select the media type according to the loaded media.
The printer stores the optimum media settings according to the media
type. When the media type is changed, each setting for media registered
to the current media setting number changes to the value for the media
type after changing.
Banner
Film
Canvas
Textile
Paper/Other
Media Adjust This is used after performing adjustments once under the following
conditions.
❏ After Auto Media Adjust is performed, banding or graininess is found
in the print results.
❏ When changing Advanced Settings after saving media settings.
Adjustment types and execution procedure U “Optimization of media
settings (Media Adjust)” on page 48
Auto is not displayed when selecting Film, Canvas, Textile, or Paper/
Other in Media Type.
Auto Print
Manual
Feed Adjustment
Standard Print
500mm Pattern Print
Head Alignment Print
Advanced Settings In most situations, use the value set for each media type as it is.
When using special media or when a problem such as head striking or
banding is detected in printing results, change the default.
SC-S80600 Series/SC-S80600L Series/SC-S60600 Series/SC-S60600L Series/SC-S40600 Series User's Guide
Using the Control Panel Menu
104
To Next Page
Loading...
Need help?
General