Epson SC-S80600 Series - Locations of Consumables and Replacement Timing; Other Maintenance

Locations of Consumables and Replacement Timing
When to perform Component to be replaced
When a prepare and replacement
message is displayed on the control panel
screen
A Air filters
B Flushing pad
C Wiper unit
U “Replacing Maintenance Parts” on page 78
EWaste Ink Bottle
U “Disposing of Waste Ink” on page 76
When an error appears on the control
panel screen indicating ink is expended
F Ink cartridge (SC-S80600 Series/SC-S60600 Series/SC-S40600 Series)
U “Replacement procedure” on page 72
G Ink Supply Unit (SC-S80600L Series/SC-S60600L Series)
U “Replacement procedure” on page 75
When the plates are deformed or
damaged.
D media edge plates
U “Replacing the media edge plates” on page 81
Other maintenance
When to perform Operation
When using SC-S80600 Series/SC-S60600
Series/SC-S40600 Series
❏ Once every three weeks
❏ Before starting operations for the day
(WH/MS only)
*
Shaking ink cartridges
U “Shaking” on page 71
SC-S80600 Series/SC-S80600L Series/SC-S60600 Series/SC-S60600L Series/SC-S40600 Series User's Guide
Maintenance
61