When there is no paper tape
A
While pulling the center section of the media
straight down, affix the media to the take up roll
core with commercially available adhesive tape.
c
Important:
Attach the media to the take up roll core with
the media in a taut state. If media is attached
in a loose state, the media may move around
during take-up.
B
Press the d button in the control panel to feed
enough media for a single wrap around the roll
core.
C
Flip the Auto switch to Off, and hold down the
Manual switch to
to wrap the media once
around the roll core.
D
Flip the Auto switch to .
SC-S80600 Series/SC-S80600L Series/SC-S60600 Series/SC-S60600L Series/SC-S40600 Series User's Guide
Basic Operations
40
To Next Page
Loading...
