Epson SC-T3100M Series

Scanning and Saving an Image
to a Memory Device
A
Connect a USB flash memory to the printer.
B
Load the original.
U “Placing Documents in the Scanner” on
page 101
U “How to Load Documents” on page 103
C
Touch Scan on the Home screen.
D
Touch Memory Device.
E
In Basic Settings, select settings, such as Color
Mode or File Format.
U “Scanning Menu (SC-T3100M Series
Only)” on page 168
If you are setting the scanning density, do the
setting from Advanced.
U “Copy Menu (SC-T3100M Series Only) ”
on page 164
If you are using the optional carrier sheet, you
must do the following settings.
❏ Specify the Scan Size from a standard size.
❏ Set Top Offset to 19 mm.
F
Press the Save button to start scanning.
G
Remove the original when scanning is complete.
While holding the original, press the OK
button on the screen, and then remove the
original.
SC-T3100M Series/SC-T5100 Series/SC-T3100 Series/SC-T5100N Series/SC-T3100N Series/SC-T2100 Series User's Guide
Scanning (SC-T3100M Series Only)
108