❏ If there are documents both on the glass and in
the ADF, the document in the ADF will be scanned.
Remove documents from the ADF before placing
a document on the glass.
❏ The ADF can not be used when:
❏ When JIS B1 or A0 is selected for Reduce/
Enlarge and multiple copies will be made
❏ The original is printed on thick stock (e.g.,
postcards or photographs)
❏ When multiple copies are made from an original
placed on the glass, the original may be scanned
once for each copy.
Wait until all the copies have been printed before
opening the scanner cover.
❏ Use the ADF to scan multi-page documents.
❏ If multiple copies are set for scanning multiple
sheets continuously, the copies will be printed on
a page basis as shown below.
Example: Order in which pages are output when
the printer is used to make two copies of a two
page document
SC-T3100M Series/SC-T5100 Series/SC-T3100 Series/SC-T5100N Series/SC-T3100N Series/SC-T2100 Series User's Guide
Making Enlarged Copies with an A3 or A4 Scanner (Except for the SC-T3100M Series)
111
To Next Page
Loading...
Need help?
General