Epson SC-T5100 Series User Manual

Printing CAD Drawings
Using the Printer Driver
This method is best suited to printing CAD drawings, such as
appearance view of buildings, at high quality.
c
Important
If lines or parts on your drawing are not printed properly,
use the HP-GL/2 or HP RTL mode.
The procedure below is for AutoCAD 2018.
A
Click Plot.
B
Select the printer in Printer/plotter, and then
click Properties....
C
Click Custom Properties.
The printer driver screen is displayed.
D
Select CAD/Line Drawing at Printer Settings
tab.
Windows
Mac
6

Epson SC-T5100 Series Specifications

General

Maximum Print Resolution	2400 x 1200 dpi
Ink Colors	Cyan, Magenta, Yellow, Black
Memory	1 GB
Print Technology	PrecisionCore MicroTFP printhead
Ink Type	UltraChrome XD2
Connectivity	Ethernet
Print Speed	22 seconds per A1/D-sized print
Print Margin Roll	3 mm (top), 3 mm (right), 3 mm (bottom), 3 mm (left)
Emulations	HP-GL/2
Media Handling	Roll and sheet
Operating Systems Supported	Windows 7/8/8.1/10, Mac OS X 10.6.8 or later
Weight	63 lbs (29 kg)