Epson SC-T5200D Series User Manual

Menu item Description
Printer Status Firmware Version xxxxxxx,x.xx,xxxx
Option Status Displays the options connected.
Show Total Prints
XXXXXX m
2
Print Status Sheet
Press Z to start printing.
Network Setup IP Address Setting Auto -
Panel IP Address, Subnet Mask, Default Gateway
IPv6 Setting Enable, Disable
IPsec Setting Enable, Disable
PSK Setting Set key at 20 characters or less (half-size characters or sym-
bols)
IEEE802.1x Setting Enable, Disable
HTTPS Redirect Setting Enable, Disable
Print Status Sheet
Press Z to start printing.
Restore Settings Yes, No
Power Settings Sleep Mode 5 to 210 minutes
Power Off Timer Off, 1 to 24 hours
Restore Settings Yes, No
Preference Language Lists the supported languages.
Unit: Length m, ft/in
Alert Lamp Setting On, Off
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide
Using the Control Panel Menu
136

Epson SC-T5200D Series Specifications

General

Brand	Epson
Model	SC-T5200D Series
Category	All in One Printer
Language	English