Setting Procedures for Printing
Making Settings in Windows
A
Display the printer driver's Printer Settings tab
and adjust the following settings.
U “Basic Printing Methods(Windows)” on
page 56
B
Select Borderless in the Size Settings area.
To fit output to the roll width, choose Fit to Roll
Paper Width before selecting Borderless.
C
In the Layout tab Borderless Enlargement
Setting area, select either Auto Expand or
Retain Size.
If Auto Expand is selected, click Amount of
Enlargement and choose the amount cut off at
the edges.
Note:
Retain Size is not available when Fit to Roll Paper
Width is selected in the Printer Settings tab or
Reduce/Enlarge is selected in the Layout tab.
Max : 3 mm for left and 5 mm for right
(the image shifts 1 mm to the
right)
Standard : 3 mm for left and right
Min : 1.5 mm for left and right
Note:
Moving the slider towards Min decreases the image
enlargement ratio. Therefore, some margins may
appear at the edges of the paper depending on the
paper and printing environment.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide
More Ways to Print
99
To Next Page
Loading...
Need help?
General
