D
Open the roll paper cover.
Note:
When removing the roll paper, you can use the
optional roll paper belt to prevent the roll paper
from unwinding.
E
Raise the roll lock lever.
F
Holding the paper by the roll adapters, move the
roll to the roll rest.
G
Lift the adapter lock levers to release the roll
paper adapters.
H
Remove the roll paper adapters.
After rewinding the roll paper carefully, store it
in the original package.
Close the roll paper cover.
Removing Roll 2
(SC-T7200D Series/SC-T5200D
Series only)
This section describes how to remove and store roll
paper of Roll 2 after printing. The pressure rollers may
leave impressions on paper that is left in the printer.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide
Basic Operations
35
To Next Page
Loading...
Need help?
General
