Epson Stylus C62 Printer Basics

27
Maintaining Your Printer
This chapter describes maintenance procedures to keep your printer working at its
best, and preparation steps for moving your printer.
■
“Cleaning the Print Head” below
■
“Replacing an Ink Cartridge” on page 29
■
“Aligning the Print Head” on page 34
■
“Cleaning the Printer” on page 35
■
“Transporting the Printer” on page 36
Cleaning the Print Head
If your printouts are unexpectedly light, or dots or lines are missing from the image,
you may need to clean the print head. This unclogs the nozzles so they can deliver ink
properly. Print head cleaning uses ink, so clean it only if quality declines.
This section explains how to clean the print head using the Head Cleaning utility
(available only when your printer is connected directly to your computer, not over a
network.)
You can also clean the print head by holding down the
b
maintenance button on the
printer for three seconds (when the red
b
error light is off).
For more information about cleaning the print head, see your Print Show movies;
select the
EPSON Printer Information Center
icon on your desktop.
Caution: When you don’t turn on your printer for a long time, the print quality can
decline, so turn it on at least once a month to maintain good print quality.

Epson Stylus C62 Specifications

Printing

printing method	4-color (CMYK) drop-on-demand Micro Piezo ink jet technology
resolution (dots per inch)	Up to 5760 x 720 optimized dpi
print speed (black text memo)	14 ppm

Paper Handling

maximum paper size	up to 8.5" x 44"
input paper tray capacity	100 sheets/10 envelopes
envelope types	No. 10, DL, C6

Dimensions and Weight

dimensions (L x W x H)	18.8" x 10.2" x 7.1"
weight	7.5 lb
maximum printable area	8.26" x 10.76"