Epson Stylus Color 1520 Quick Setup

single sheet
icon
Load the Paper
6. Push down the clamps until they lock in place.
7. Press the Alt button to return the print heads to their home
position and charge the advanced ink delivery system.
Charging takes up to 7 minutes, with the Pause light
flashing until it’s finished; then the Pause light stays on.
Don’t turn off the printer or interrupt this important
process or you’ll use up more ink than necessary.
8. Close the printer cover. Then press the Pause button to turn
off the Pause light.
Caution:
Never turn off the printer
when the Pause light is
flashing. However, if the
Pause light is still flashing
after 10 minutes and the
printer is not moving or
making noise, you may
turn off the printer.
To test the printer operation, load about 10 sheets of letter-size
plain paper in the built-in sheet feeder as described here.
1. Make sure the paper release lever is set to the single sheet
position (the appears beneath the lever handle).
○○○○○○
5
Note:
For instructions on
loading other types of
paper or using the other
paper feeders, see your
User’s Guide .
Quick setupLoire2 5/22/97, 10:30 AM5

Epson Stylus Color 1520 Specifications

General

Color	Yes
Maximum resolution	600 x 1200 DPI
Print speed (black, normal quality, A4/US Letter)	- ppm
Maximum input capacity	100 sheets
Envelopes sizes	10, C5, DL
Standard media sizes	4\
Paper tray media types	Envelopes, Labels, Plain paper
Non-ISO print media sizes	Legal
ISO A-series sizes (A0...A9)	A4
ISO B-series sizes (B0...B9)	B5
Power requirements	120V AC, 50/60 Hz
Printing noise level	45 dB
Maximum operating temperature range (T-T)	-20 - 60 °C
Market positioning	Home & office