Installing on a Macintosh
1. Turn on your Macintosh and turn off any virus protection
programs you may have. (See your virus protection
documentation for instructions.)
2. When your Macintosh has finished starting up, turn on your
printer.
3. Insert the EPSON printer software CD-ROM and
double-click the Installer icon.
4. Click Continue to display the Installer Script dialog box.
5. Click Install and follow the instructions on the screen to copy
the software to your hard disk. After the files are copied, a
message tells you that installation is complete.
6. Click Restart to restart your Macintosh.
If you connected your printer to a serial interface on your
Macintosh, follow the steps in the next section to select the printer
in the Chooser.
If you connected your printer to an AppleTalk network with an
optional interface card, see “Network Printing on a Macintosh” in
Chapter 4 of your User’s Guide for instructions on setting up your
printer on the network.
Selecting Your Printer
After you install the software, you need to select your printer in
the Chooser.
1. Open the Chooser in the Apple menu.
2. Click the EPSON Stylus(EX) icon.
3. Click the icon for the port where you connected your printer.
(On a PowerBook with a combination printer/modem port,
select the modem port icon.)
4. Click On if you want to turn on background printing so you
can use your Macintosh while you print. (Keep in mind that
background printing is slower and may slow down your
system while you print.)
Note:
If your Macintosh doesn’t
have a CD-ROM drive,
you can make diskettes
from the CD-ROM using
another Macintosh. See
“Making Macintosh
Diskettes from the
CD-ROM” on page 15
for instructions.
14
Quick setupLoire2 5/22/97, 10:31 AM14
To Next Page
Loading...
Need help?
General
