Making Macintosh Diskettes from the CD-ROM
Before making diskettes from the CD-ROM, name the
formatted diskettes you’ll use Disk1 and Disk2 (using a capital
“D” and no space before the number). If they’re not named
correctly, the diskettes won’t be able to install your software.
1. Turn on the Macintosh and turn off any virus protection
programs you may have. (See your virus protection
documentation for instructions.)
2. Insert the EPSON printer software CD-ROM in the
CD-ROM drive.
3. Double-click the CD-ROM icon on the desktop. (You must
double-click the icon even if a window opens when you
insert the CD-ROM.) The new window contains the Disk1
and Disk2 folder icons.
4. Double-click the Disk1 folder icon to open the folder.
5. Insert the diskette you named Disk1 in a diskette drive.
You see the Disk1 diskette icon on the desktop.
6. Select all the icons in the CD-ROM Disk1 folder and drag
them to the Disk1 diskette icon on the desktop.
7. When the icons are copied, eject the diskette and repeat
steps 4 through 6 for the CD-ROM folder and diskette you
named Disk2.
8. Eject Disk2. Then install the printer software on your
Macintosh using the diskettes. See “Installing on a
Macintosh” on page 14 for instructions.
15
5. If you chose the printer port in step 3, click Inactive to
turn off AppleTalk.
6. Close the Chooser.
Quick setupLoire2 5/22/97, 10:31 AM15
To Next Page
Loading...
Need help?
General
