Epson Stylus CX4600 Service Manual

EPSON Stylus CX3500/CX3600/CX3650/CX4500/CX4600 Revision A
DISASSEMBLY AND ASSEMBLY Disassembly 151
V External View (3)
Figure 4-41. Carriage Unit Removal (3)
T PW Sensor Board Removal
1. Remove the screw (x1, ) for securing PW Sensor Cap, and then remove
PW Sensor Cap.
2. Disconnect Head FFC from the connector of PW Sensor Board, and then pull
out Head FFC from the notch of Carriage.
T Head FFC Removal
1. Remove Print Head from Carriage Unit.
2. Pull out Head FFC from the notch of Carriage.
3. Release Head FFC from the hooks (x4, ) for securing Head FFC.
4. Disconnect Head FFC from the connector of CSIC board.
PW Sensor Board
Connector
Head FFC
Notch
PW Sensor Cap
C.B.P (P1) 1.7x5 F/ZB
(2±0.5kgfcm)
Hooks
Notch
Connector
Do not allow PW Sensor Cap to float.
ADJUSTM ENT
REQUIRED
After changing the Carriage Unit for a new one, always apply
grease KEN to the specified portions.
T Refer to Chapter 6, Figure 6-7 (p.178)
ADJUSTM ENT
REQUIRED
When having replaced Carriage Unit, implement the adjustment in
the following order. (Refer to Chapter 5 “ADJUSTMENT”)
1. PG Adjustment
2. Top margin adjustment
3. Head angular adjustment
4. Bi-D adjustment
5. PW adjustment
6. First dot adjustment

Epson Stylus CX4600 Specifications

Printer Specifications

printing technology	CMYK drop-on-demand Micro Piezo ink jet
ink type	DURABrite Ink
maximum resolution	5760 x 1440 optimized dpi

Scanner Specifications

scanner type	Color flatbed
scan area maximum	8.5" x 11.7"
resolution optical	600 dpi

Copier Specifications

copy speed black text	13 cpm
copy speed color text	13 cpm
copy size	4" x 6" Letter (8.5" x 11")

Dimensions and Weight

dimensions	16.9" x 13.5" x 6.7"
weight	18.3 lb
weight with ink cartridges	18.3 lb