20
Faxing a Document or Photo
5. Press
Menu
, if necessary, to adjust any of the following settings:
■
Resolution
to increase the scanning resolution of a faxed document
■
Contrast
to change the contrast of the faxed document
■
Fax Delay
to specify a different time to send your fax. (You cannot send
another fax until the delayed fax has been sent or cancelled.)
■
Fax Mode
to select
Polling
mode to receive a fax from another fax
machine to which you have dialed (such as a fax information service).
Change the setting back to
Sending
when you’re finished.
Press
OK
when you’re done selecting settings.
6. Press
OK
, if desired, to see a summary of your fax transmission settings.
7. Press x
Start
to send your fax. To cancel faxing, press y
Stop/Clear
Settings
.
After your original(s) are scanned, you see this screen:
8. If you need to fax additional pages, press
OK
. Place your original(s) on the
scanner glass or in the Automatic Document Feeder, then press
OK
to
continue.
If you do not need to fax another page, press
Back
. The printer dials the fax
number and faxes your document.
Note:
If the fax number is busy, you see a redialing message and the CX9400Fax Series
redials after one minute. To redial immediately, press Redial/Pause.
To Next Page
Loading...
