EasyManuals Logo

Epson Stylus DX5000 Series User Manual

Epson Stylus DX5000 Series
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
Handling Paper 9
En gli sh
4. Set the paper as shown in the following
illustrations.
5. Flip the feeder guard back.
Also make sure the paper thickness lever is set
down to the m position.
Note:
Make sure you do not load more than the recommended
number of sheets. Check the Paper Type setting before
printing to make sure it matches the type of paper you have
loaded (& “Selecting Paper on page 8).
The printable
side is often
whiter or
brighter than the
other side.
place behind
the tabs
make sure it fits
under the arrow
inside the left
edge guide
10 × 15 cm (4 × 6 in.)
and 13 × 18 cm
(5 × 7 in.)
A4
The letter L appears briefly in
the k [Copies] window on the
control panel when you move
the lever to the m position; the
letter H appears when you
move it to the ^ position.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson Stylus DX5000 Series and is the answer not in the manual?

Epson Stylus DX5000 Series Specifications

General IconGeneral
Print TechnologyInkjet
Maximum Print Resolution5760 x 1440 dpi
Scanner TypeFlatbed
Scan Resolution1200 x 2400 dpi
Copy Resolution600 x 600 dpi
InterfaceUSB 2.0
FunctionsPrint, Scan, Copy
Ink Cartridge Configuration4 individual ink cartridges
Input Capacity100 sheets
Output Capacity50 sheets
Ink ColorsBlack, Cyan, Magenta, Yellow
Weight5.8 kg
Operating System SupportWindows, Mac
Paper SizesA4, A5, B5, Letter, Legal, Envelopes

Related product manuals