Wireless Network Installation
21
Confirm Your Settings and Connect to the Network
1. When you see a screen like this one, verify that the settings are correct. If you
need to change a setting, press
y
Back
until you see the setting you need to
change.
2. Once you have verified that your network settings are correct, press
OK
to save
the settings and return to the Network Settings menu.
3. Press the
r
Copy
button to exit the Setup menu.
4. On your computer, connect to the wireless network name you created on
page 18 (see your computer or wireless adapter’s documentation for details).
5. Continue with “Install Software” on page 23.
Network Guide_R1.fm Page 21 Wednesday, April 8, 2009 2:37 PM
To Next Page
Loading...
Need help?
General
