4
Wireless Network Installation
Wireless Network Installation
To add the printer to your wireless network, you need to know the name (SSID)
of your wireless network. If it has security enabled, you also need to know the
WEP key or WPA passphrase. Write down your network and security information
in the space provided below:
■ Network name (SSID): _________________________________________
■ WEP key or WPA passphrase: ____________________________________
Note:
If your WPA passphrase contains upper- or lowercase letters, be sure to note it
correctly.
If you don’t know your wireless network name (SSID), WEP key, or WPA passphrase,
contact the person who set up your wireless network before you begin.
Connect Wirelessly Using the Setup Wizard
Follow the steps below to connect to your wireless network.
1. Press the
F
Setup
button on the printer’s control panel.
2. Press l or r to select
Network Settings
, then press
OK
.
Network Guide_R1.fm Page 4 Wednesday, April 8, 2009 2:37 PM
To Next Page
Loading...
Need help?
General
